File:Atari 2600 Jr PAL schematic, power input and regulator (Jerzy Sobola).png
Summary
[edit | edit source].png&veaction=edit§ion=1){kind=link}
.png&action=edit§ion=1){kind=link}
Crop of Jerzy Sobola's redrawn schematic of a PAL Atari 2600 Jr. board ("Motherboard C012283 rev. B", sheet 1 of 2, 8 September 2000), enlarged two times: the power jack J2 with C2 (0.1 µF), the 2200 µF reservoir C26, the power switch S4, C37 (4.7 µF), the 7805 regulator VR1 with C36 (0.1 µF) on its output, and the power LED DS1 fed through R57 (750 ohms) from the switched side of S4, ahead of the regulator.
Source
[edit | edit source].png&veaction=edit§ion=2){kind=link}
.png&action=edit§ion=2){kind=link}
Cropped from File:Atari 2600 Jr PAL motherboard schematic (Jerzy Sobola).png, hosted on this wiki (from the Internet Archive item atari-2600-schematics-archive).
.png){kind=link}
Author
[edit | edit source].png&veaction=edit§ion=3){kind=link}
.png&action=edit§ion=3){kind=link}
Jerzy Sobola
Licence
[edit | edit source].png&veaction=edit§ion=4){kind=link}
.png&action=edit§ion=4){kind=link}
Not stated at the source. Redrawn from an Atari board; hosted for repair reference with the draughtsman credited.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:18, 25 October 2026 | | 644 × 594 (6 KB) | Josh (talk | contribs) | Upload for repair guide |
You cannot overwrite this file.
File usage
The following page uses this file:
.png&oldid=30373){kind=link}