File:Atari STE WD1772 data bus pull-up network (exxos).jpg

Size of this preview: 800 × 595 pixels.
Original file (800 × 595 pixels, file size: 68 KB, MIME type: image/jpeg)
Summary
[edit | edit source]A nine-pin bussed 10 kΩ resistor network (marked 9X-1-103) soldered along the data pins of the WD1772 floppy controller U301 on an Atari STE main board, with a white wire taking the network's common pin to +5 V. This is exxos's pull-up fix for floppy and hard disk errors on the DMA data bus.
Source
[edit | edit source]exxos, https://www.exxosforum.co.uk/forum/viewtopic.php?t=1417, attachment ste_fix.jpg (retrieved 2026-10-25).
Author
[edit | edit source]exxos (Chris Swinson); the underlying schematic is Atari Corporation's.
Licence
[edit | edit source]Copyright exxos (and Atari Corporation for the schematic). Used with credit for repair reference; not freely licensed.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 11:33, 25 October 2026 | 800 × 595 (68 KB) | Josh (talk | contribs) | Upload exxos figure for STE hard disk corruption guide |
You cannot overwrite this file.
File usage
The following page uses this file: