File:Lifted pad on a circuit board (Adafruit).jpg
Size of this preview: 800 × 553 pixels.
Original file (800 × 553 pixels, file size: 247 KB, MIME type: image/jpeg)
Summary
[edit | edit source].jpg&veaction=edit§ion=1){kind=link}
.jpg&action=edit§ion=1){kind=link}
Close-up of a through-hole solder pad that has come away from the surface of a circuit board. The pad, still carrying solder, is lifted up the component lead and stands clear of the board; a ring of flux residue marks where it was.
Source
[edit | edit source].jpg&veaction=edit§ion=2){kind=link}
.jpg&action=edit§ion=2){kind=link}
Adafruit Learning System, Adafruit Guide To Excellent Soldering, page "Common Soldering Problems", section "Lifted Pad"; asset 2039, tools_Lifted_Pad.jpg (retrieved 2026-10-25).
Author
[edit | edit source].jpg&veaction=edit§ion=3){kind=link}
.jpg&action=edit§ion=3){kind=link}
Bill Earl (owner recorded on the Adafruit asset page).
Licence
[edit | edit source].jpg&veaction=edit§ion=4){kind=link}
.jpg&action=edit§ion=4){kind=link}
Creative Commons Attribution-ShareAlike, as recorded on the Adafruit asset page.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 14:49, 25 October 2026 | | 800 × 553 (247 KB) | Josh (talk | contribs) | Upload for the PCB repair technique pages |
You cannot overwrite this file.
File usage
The following page uses this file:
.jpg&oldid=30901){kind=link}