File:Logic board desoldering faults (Macintosh Repair and Upgrade Secrets Fig 10-6).png
Summary
[edit | edit source].png&veaction=edit§ion=1){kind=link}
.png&action=edit§ion=1){kind=link}
Drawing of four typical faults to look for after desoldering chips from a logic board: 1, pad lifted from the board; 2, break between a pad and its trace; 3, cut trace near a pad; 4, solder bridge between a pad and a trace. Pina's Figure 10-6.
Source
[edit | edit source].png&veaction=edit§ion=2){kind=link}
.png&action=edit§ion=2){kind=link}
Larry Pina, Macintosh Repair & Upgrade Secrets (Hayden Books, 1990), chapter 10 "Disk Drive, RAM, ROM, and SCSI Upgrades", Figure 10-6, p. 181 (PDF p. 195). Cropped from File:Macintosh Repair & Upgrade Secrets.pdf (see Macintosh Repair & Upgrade Secrets).
Author
[edit | edit source].png&veaction=edit§ion=3){kind=link}
.png&action=edit§ion=3){kind=link}
Larry Pina; the book credits the figure to Sophisticated Circuits, Inc.
Licence
[edit | edit source].png&veaction=edit§ion=4){kind=link}
.png&action=edit§ion=4){kind=link}
Copyright © 1990 Larry Pina; published by Hayden Books (Howard W. Sams & Company). Not freely licensed. Reproduced from the copy of the book hosted on this wiki for repair reference, with the source cited.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 09:36, 25 October 2026 | | 836 × 760 (101 KB) | Josh (talk | contribs) | Upload figure for repair guide |
You cannot overwrite this file.
File usage
The following 2 pages use this file:
.png&oldid=29914){kind=link}