File:Mattel Football circuit board, component side.jpg
Summary
[edit | edit source]
Component side of a Mattel Football (model 2024) board set, unfolded: the display board at the top (silkscreened CM01-D103 with the Rockwell logo, nine round lenses over the digit LEDs and light guides over the LED field), the main board in the middle with a 10 µF 16 V axial electrolytic capacitor, a resistor, a three-position slide switch and two pairs of red and black leads, and the key board at the bottom joined by tape. The 42-pin position of the B6100 microcontroller is empty in the scan; Riddle's page shows the B6100 package and die photographed separately. The solder side of this main board is silkscreened 2024 REV D.
Source
[edit | edit source]
Sean Riddle, "The First Mattel LED games", scan at https://www.seanriddle.com/rockwell/pcbscans/footballpcbf.JPG (retrieved 2026-10-19); the board markings are from the matching solder-side scan footballpcbb.JPG. Downscaled to 2200 px.
Author
[edit | edit source]
Sean Riddle.
Licence
[edit | edit source]
No licence stated at the source; copyright Sean Riddle. Hosted for repair reference with credit to the author and a link to the source.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:58, 19 October 2026 | | 1,131 × 2,200 (397 KB) | Josh (talk | contribs) | Upload for the Mattel Football capacitor guide |
You cannot overwrite this file.
File usage
There are no pages that use this file.
