File:Tandon TM100-2A turning the alignment cam screw (Philip Avery article).jpg
Size of this preview: 640 × 480 pixels.
Original file (640 × 480 pixels, file size: 183 KB, MIME type: image/jpeg)
Summary
[edit | edit source].jpg&veaction=edit§ion=1){kind=link}
.jpg&action=edit§ion=1){kind=link}
Turning the alignment cam screw of a Tandon TM100-2A with a long flat-blade screwdriver passed down beside the logic board.
Source
[edit | edit source].jpg&veaction=edit§ion=2){kind=link}
.jpg&action=edit§ion=2){kind=link}
Philip Avery, "Adjusting the radial alignment a Tandon TM100-2A drive without an alignment disk", published on Terry Stewart's blog, 28 June 2010, photo 6. Image file https://www.classic-computers.org.nz/blog/images/2010-06-28-tm100-radial-alignment-5.JPG (retrieved 2026-10-25).
Author
[edit | edit source].jpg&veaction=edit§ion=3){kind=link}
.jpg&action=edit§ion=3){kind=link}
Not credited separately; the photo illustrates Philip Avery's article on Terry Stewart's (Tezza's) blog.
Licence
[edit | edit source].jpg&veaction=edit§ion=4){kind=link}
.jpg&action=edit§ion=4){kind=link}
No licence is stated on classic-computers.org.nz. Reproduced with credit for repair reference.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:41, 25 October 2026 | | 640 × 480 (183 KB) | Josh (talk | contribs) | Upload for repair guide |
You cannot overwrite this file.
File usage
The following page uses this file:
.jpg&oldid=32640){kind=link}