File:Tandon TM100 head module retaining and cam screws (manual figure 5-7).png
Summary
[edit | edit source].png&veaction=edit§ion=1){kind=link}
.png&action=edit§ion=1){kind=link}
Figure 5-7 from Tandon's TM100 service manual, "Head Module Retaining and Cam Screws". The left view, from above with the back of the drive at the top, marks the module retaining screw and the cam screw at the rear of the head module beside the servo circuit board. The right view, from below, marks the two module retaining screws beside the spindle pulley. Rendered at 200 dpi and cropped.
Source
[edit | edit source].png&veaction=edit§ion=2){kind=link}
.png&action=edit§ion=2){kind=link}
Tandon Corporation, OEM Operating and Service Manual, TM100-1, TM100-2 Disk Drives, 48 Tracks Per Inch, 179022-001 Rev. B (1983), p. 5-8 (PDF page 50), hosted here as File:Tandon TM100-1 TM100-2 48TPI Operating and Service Manuals 1983.pdf.
Author
[edit | edit source].png&veaction=edit§ion=3){kind=link}
.png&action=edit§ion=3){kind=link}
Tandon Corporation
Licence
[edit | edit source].png&veaction=edit§ion=4){kind=link}
.png&action=edit§ion=4){kind=link}
Copyright Tandon Corporation, 1983. Not freely licensed. Reproduced for repair reference, with the source cited.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 22:40, 25 October 2026 | | 1,433 × 1,225 (61 KB) | Josh (talk | contribs) | Upload for repair guide |
You cannot overwrite this file.
File usage
The following page uses this file:
.png&oldid=32629){kind=link}