File:Apple Monitor II and Monochrome Monitor IIe Technical Procedures.pdf
Summary
[edit | edit source]Apple's Monitor II/Monochrome Monitor IIe Technical Procedures, the section of Apple Service Technical Procedures: Apple II Family, Volume Two (part number 072-0229, November 1991 build) covering the 12-inch Monitor II and its platinum version, the Monochrome Monitor IIe. 83 pages: the two-page volume table of contents, then the note that the two monitors are identical apart from name and colour, Section 1 Basics, Section 2 Take-Apart (back case, CRT discharge, line filter board, main electronics assembly, CRT, fuse, power switch, power transformer), Section 3 Adjustments (yoke tilt and ring magnets, pincushion and trapezoid magnets, vertical and horizontal adjustments), Section 4 Troubleshooting (symptom chart), Section 5 Additional Procedures (power cord upgrade, line filter board modification and ground resistance check) and the Illustrated Parts List. Section pages are dated May 1984 to April 1990. Module-level service only: no schematic or component values. Described on Apple Monitor II Documentation.
Source
[edit | edit source]Extracted from the Internet Archive scan astpv2 (Apple Service Technical Procedures: Apple II Family, Volume Two, uploaded by [email protected]; retrieved 2026-10-02): PDF pages 13-14 (volume table of contents) and 155-235. No pages within the section removed or reordered.
Author
[edit | edit source]Apple Computer, Inc.
Licence
[edit | edit source]Copyright Apple Computer, Inc. Not freely licensed. Hosted for preservation and repair reference, with the source cited.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Dimensions | User | Comment | |
|---|---|---|---|---|
| current | 11:41, 2 October 2026 | 0 × 0 (2.64 MB) | Josh (talk | contribs) | Upload with source and licence |
You cannot overwrite this file.
File usage
There are no pages that use this file.