Jump to content

File:Atari 400 power supply schematic (Field Service Manual figure 2-4).png

From RetroTechCollection
Original file (1,210 × 1,605 pixels, file size: 153 KB, MIME type: image/png)

Summary

[edit | edit source]

Figure 2-4 of Atari's 400/800 field service manual: the Atari 400 power supply board. 9 V AC enters at J204 through the power switch S203 and the interlock switch S202 to the bridge CR206 to CR209; the 7805 regulator A202 with the 33 Ω 2 W resistor R202 across it makes +5 V, the doubler CR204 and CR205 with the 78M12 regulator A201 makes +12 V, and CR202, CR203 and the 5.1 V zener CR201 make −5 V, with the power LED CR210. Outputs go to the motherboard through J201; the board also carries the RF modulator A203, the channel switch S201 and the peripheral (SIO) socket J202.

Source

[edit | edit source]

Rendered from Atari 400 800 Field Service Manual, May 1983 on the Internet Archive (Atari, Inc., ATARI Home Computer Field Service Manual 400/800, May 1983 revision), PDF page 46, at 150 dpi and cropped. The June 1982 edition is hosted here as Atari 400 800 Field Service Manual June 82.

Author

[edit | edit source]

Atari, Inc.

Licence

[edit | edit source]

Copyright Atari, Inc. Hosted for preservation and repair reference, with the source cited.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current12:38, 25 October 2026Thumbnail for version as of 12:38, 25 October 20261,210 × 1,605 (153 KB)Josh (talk | contribs)Upload figure for Atari 400 and 800 repair guides

The following 2 pages use this file: