File:Atari 810 rear board drive motor circuit (field service manual appendix D).png
Summary
[edit | edit source]Drive motor control circuit from Atari's schematic of the 810 rear board CA014161 Rev. B: the drive motor connector J103, C120 and CR109 across the motor, switch transistor Q112 with R137 and C142, the transistor array A107 (sections A to E), the speed control R142 (500K) with R144 and C144, the tachometer diode CR110 from J103 pin 5, R138 to R141, R143, R145, C143, and the current-sense resistor R139 (1.1 ohms).
Source
[edit | edit source]Atari, Inc., Atari 810 Disk Drive Field Service Manual (FS015854, Rev. 1, July 1980), hosted here as File:Atari 810 Disk Drive Field Service Manual FS015854 Rev 1.pdf (Internet Archive item Atari810DiskDriveFieldServiceManualRev1), PDF page 149 (appendix D, rear board schematic CA014161 Rev. B, printed page 9-6), rotated to read upright. Rendered and cropped for the wiki on 2026-10-25.
Author
[edit | edit source]Atari, Inc.
Licence
[edit | edit source]Copyright Atari, Inc. Hosted for preservation and repair reference, with the source cited.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 21:34, 25 October 2026 | 1,200 × 1,376 (323 KB) | Josh (talk | contribs) | Figure for an Atari 810 repair guide |
You cannot overwrite this file.
File usage
The following page uses this file: