Jump to content

File:Atari 810 stepper motor drivers (Sams Computerfacts CD9 schematic).png

From RetroTechCollection
Original file (1,900 × 1,300 pixels, file size: 671 KB, MIME type: image/png)

Summary

[edit | edit source]

Stepper motor section of the Sams schematic for the Atari 810: PIA lines PB2 to PB5 through R121 to R124 (1000 ohms) to the MPSA06 drivers Q106 to Q109, the 1N4001 diodes CR101 to CR104, the stepper connector J102 pins 1 to 4, the stepping motor M4 with its common on J102 pin 5 fed through R125 (1.1 ohms) from P101/J106 pin 20 (the 11.2 V source), and R120 (270 ohms) to the 12.0 V source. Sams marks each winding 7.3.

Source

[edit | edit source]

Howard W. Sams & Co., Computerfacts CD9, Atari Model 810 (June 1986), hosted here as File:Sams Computerfacts CD9 Atari 810 Disk Drive.pdf (Internet Archive item samscomputerfactstechnicalservicedataatarimodel810diskdrive1986sams), PDF page 3 (fold-out schematic, printed page 2). Cropped and downscaled for the wiki on 2026-10-25.

Author

[edit | edit source]

Howard W. Sams & Co.

Licence

[edit | edit source]

Copyright 1986 Howard W. Sams & Co. Used with credit for repair reference, not freely licensed.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current21:34, 25 October 2026Thumbnail for version as of 21:34, 25 October 20261,900 × 1,300 (671 KB)Josh (talk | contribs)Figure for an Atari 810 repair guide

The following page uses this file: