File:IBM 5170 single hard drive cabling, flat control cable (minuszerodegrees).jpg
Summary
[edit | edit source].jpg&veaction=edit§ion=1){kind=link}
.jpg&action=edit§ion=1){kind=link}
Minuszerodegrees.net's cabling diagram for a single hard drive on the Fixed Disk and Diskette Drive Adapter that IBM supplied in the IBM 5170, using a flat (straight-through) control cable: the 20-pin data cable from J4 and the 34-pin control cable from J5 on the adapter, pin 1 of each cable connector to pin 1 of the drive connector, a terminator fitted on the drive, and the drive-select jumper in the first position (DS0 on a drive numbered DS0 to DS3, DS1 on a drive numbered DS1 to DS4).
Source
[edit | edit source].jpg&veaction=edit§ion=2){kind=link}
.jpg&action=edit§ion=2){kind=link}
https://www.minuszerodegrees.net/5170/hdd/5170_hard_drive_cabling_single_flat.jpg (retrieved 2026-10-25), linked from https://www.minuszerodegrees.net/5170/cards/5170_hard_floppy_controller_cabling_info.htm
Author
[edit | edit source].jpg&veaction=edit§ion=3){kind=link}
.jpg&action=edit§ion=3){kind=link}
minuszerodegrees.net
Licence
[edit | edit source].jpg&veaction=edit§ion=4){kind=link}
.jpg&action=edit§ion=4){kind=link}
No licence is stated on minuszerodegrees.net. Reproduced with credit for repair reference.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 21:45, 25 October 2026 | | 1,122 × 853 (408 KB) | Josh (talk | contribs) | Upload for repair guide |
You cannot overwrite this file.
File usage
The following page uses this file:
.jpg&oldid=32359){kind=link}