Apple II and II Plus Technical Procedures
The Apple II/II Plus Technical Procedures are the Apple II and Apple II Plus section of Apple's Apple Service Technical Procedures: Apple II/Apple III Archived Products, Volume One (part number 072-0231, November 1991 build). The section has 70 pages, dated September 1982 to November 1991, with a partial text layer.
Contents
[edit | edit source]- Section 1, Take-Apart: housing, motherboard, keyboard, power supply, speaker modification, power cable extension, power light (written for the pre-RFI Apple II)
- Section 2, Diagnostics: the Apple II diagnostic tests for RAM, ROM, keyboard, paddles, cassette, colour bars and common cards
- Section 3, Troubleshooting: the Apple II Troubleshooting Chart and the Apple II Chip Swapping Chart, by board location
- Illustrated Parts List: finished goods, motherboard ROMs, cards, cables, power supply fuse, and notes on the longer replacement power supply
- Appendix A, keyboard and keyswitch identification and replacement
- Appendix B, power supply switch replacement
- Appendix C, Language Card
What this document does not contain
[edit | edit source]Module-level service with chip-swapping charts: no schematic and no power supply component values. The schematics are described at Apple II Schematics.
Pages that cite this document
[edit | edit source]- Apple II: cites Section 1, pp. 1.2-1.11, Section 3, pp. 3.3-3.4 and Apple I, pp. 3.5-3.8
- Apple II General Maintenance: cites Section 1, pp. 1.2-1.11, Section 3, pp. 3.3-3.4 and Apple I, pp. 3.5-3.8
- Apple II Plus: cites Section 3, pp. 3.3-3.8
- Apple II Reference Manual
- Apple II Schematics