SGI Origin 350 Documentation
SGI Origin 350 Documentation describes the Silicon Graphics manual for the SGI Origin 350 hosted here, with its PDF. It is SGI's own electronic edition with searchable text, from the mirror of SGI's TechPubs library.[1] It does not go below the customer-replaceable units: there are no schematics or component lists for the node board, interface board or power supplies.
SGI Origin 350 Server System User's Guide (007-4566-001)
[edit | edit source]SGI's user's guide for Origin 350 systems, document number 007-4566-001, first edition, June 2003, 274 pages.[2]
Contents: 1 installation and operation (safety, racks and shipping crates, rackmounting with space requirements Table 1-2 p. 26, cabling, connecting the system console pp. 51-52, powering on and off with and without an L2 controller pp. 53-59, joining two servers p. 60, front panel controls p. 61, L1 modes pp. 62-63); 2 system overview (architecture, configuration ranges Table 2-1 p. 75, modules, storage and power components); 3 compute module (IP53 node board, DIMMs, Bedrock ASIC, IO9 card, interface board, PCI riser, drives, power supplies, front and rear panels pp. 122-126, Table 3-1 comparing it with the Origin 300, specifications Table 3-6 p. 131); 4 MPX module; 5 NUMAlink module; 6 customer-replaceable units (safety pp. 155-157, PCI and PCI-X cards, disk drives, power supplies and their LED Table 6-1 pp. 181-185, memory pp. 186-195, L1 controller display pp. 196-201); 7 troubleshooting (chart Table 7-1 pp. 204-205, L1 messages Table 7-2 pp. 206-207, SGI Electronic Support); appendix A specifications and connector pinouts; appendix B regulatory and safety information, including the lithium battery statement.[2]
Download: SGI Origin 350 Server System User's Guide (007-4566-001).pdf
Other documents
[edit | edit source]The user's guide refers to the SGI L1 and L2 Controller Software User's Guide (007-3938) for the full L1 command set.[2] The L1 command reference in SGI's SGI Origin 300 System with NUMAlink Module User's Guide, hosted at File:SGI Origin 300 System with NUMAlink Module User's Guide (007-4498-002).pdf, describes the env, fan, log and power commands; see SGI Origin 300 Documentation.[3] Owners' env output from Origin 350 modules has the same layout.[4]
Pages that cite this document
[edit | edit source]- SGI Origin 350
- SGI Origin 350 General Maintenance
- SGI Origin 350 Troubleshooting Guide
- SGI Origin 350 Capacitor Replacement Guide
References
[edit | edit source]- ↑ SGI TechPubs library mirror, hardware manuals index, techpubs.jurassic.nl/manuals/hdwr/ (retrieved 22 October 2026).
- ↑ 2.0 2.1 2.2 Silicon Graphics, SGI Origin 350 Server System User's Guide, 007-4566-001, record of revision and contents.
- ↑ Silicon Graphics, SGI Origin 300 System with NUMAlink Module User's Guide, 007-4498-002, appendix C, pp. 177-220.
- ↑ "o350 env chip locations", IRIX Network forum, post by jan-jaap, 28 February 2022, forums.irixnet.org/thread-3424.html.