Jump to content

SGI Onyx 350 Documentation

From RetroTechCollection
SGI Onyx 350 compute module front (User's Guide Figure 1-3)
Onyx 350 compute module, from the user's guide below (Figure 1-3)

SGI documentation for the SGI Onyx 350: the user's guide for the visualisation system and the controller software guide. The SGI Origin 350 Server System User's Guide, which covers the same compute module, is listed on SGI Origin 350 Documentation.

User's guide (007-4632-001)

[edit | edit source]

Silicon Graphics, SGI Onyx 350 Visualization System User's Guide, document number 007-4632-001, June 2003, 210 pages. It covers Onyx 350 systems with InfiniteReality or InfinitePerformance graphics.

Contents: 1, System Overview (p. 1), with configurations, power components and optional modules; 2, Installation and Operation (p. 21), with safety, monitors, keyboard and mouse (including PS/2 set-up), power connections and powering on (p. 38) and off (p. 43); 3, Compute Module (p. 47), with the IP53 node board, IO9 card, interface board, power supplies and front and rear panels; 4, InfinitePerformance Graphics and Compute Module (p. 73), with the DCD option; 5, InfiniteReality Graphics Module (p. 89); 6, Memory and PCI Expansion Module (p. 101); 7, Installing and Removing Customer-replaceable Units (p. 105), with PCI cards, disks, DIMMs, the L1 display (p. 132) and power supplies (p. 136); 8, Troubleshooting (p. 141); appendix A, Technical Specifications and Pinouts (p. 149); B, Safety Information and Regulatory Specifications (p. 175).

It gives no board-level repair information, no parts list and no component values.

Download: File:SGI Onyx 350 Visualization System User's Guide (007-4632-001).pdf

Other documents

[edit | edit source]